Výpredaj produktov | STRENDPRO.sk

2209165

Nozzle GCE 0769919, P-SF 100-150 mm, cutting

The PSF cutting nozzle is designed for the FIT+ machine cutting torch for gas cutting. It covers a cutting range of 100 to 150 mm. It is suitable for use with propane and natural gas according to the prescribed configuration of the cutting system.

Cat. number: 2209165

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

29,84 €

/ ks

excl. VAT

Add to list

2203302

Nozzle Fronius 42,001,4050, 17/25x63, gas, for MTW500i

The gas nozzle has a length of 63 mm, an outer diameter of 25 mm and a mouth diameter of 17 mm. It directs the shielding gas around the welding wire and the weld pool. It is used to replace a worn nozzle of the corresponding design.

Cat. number: 2203302

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

9,77 €

/ ks

excl. VAT

Add to list

4291460

Anchor HILTI HSA-R M10x98 35/25/- #2004203

A through-bolt expansion anchor made of A4 stainless steel with M10 thread and a total length of 98 mm, designed for mechanical fastening into non-cracked concrete. It allows installation through the fixed component as well as stand-off installation. During design and installation, the installation

Cat. number: 4291460

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

4,02 €

/ ks

excl. VAT

Add to list

2131605

Light Scangrip, 3.7V/5200mAh + 5m cable 230V, 600/150lm, 9043-1004

The narrow inspection LED lamp LINE LIGHT C+R illuminates even hard-to-reach places during servicing and repairs. It has a main light with a luminous flux of 600 lm and a spot light at the end with a flux of 150 lm. It allows operation from a 3.7 V battery with a capacity of 5,200 mAh as well as via

Cat. number: 2131605

weight: 1 kg

M. unit: ks

Logistické balenie: 1 ks

107,63 €

/ ks

excl. VAT

Add to list

2140546

Electrodes Boehler FOX A7, 3.2x350 mm, 140 pcs, 4.5 kg

FOX A7 electrodes with a diameter of 3.2 mm and a length of 350 mm have a basic coating. They are designed for joining dissimilar and difficult-to-weld steels and for creating interlayers under hard-facing welds. For joints between austenitic and ferritic steels, the operating temperature is limited

Cat. number: 2140546

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

Minimálne vyskladňovacie množstvo: 140 ks

1,25 €

/ ks

excl. VAT

Add to list

2120685

Square Format 4604-0200, 200x130mm, DIN 875, stop

A try square with arm lengths of 200 × 130 mm is used to check right angles in precision work in engineering and workshop settings. It is made of special steel and has ground flat sides, edges and reference surfaces. The arm cross-section is 30 × 6 mm and the angular tolerance is 0.04 mm.

Cat. number: 2120685

weight: 0,1 kg

M. unit: ks

Logistické balenie: 1 ks

26,76 €

/ ks

excl. VAT

Add to list

2120699

Wera screwdriver set, socket, 7-piece

A seven-piece set of hollow shaft screwdrivers designed for tightening and loosening nuts and bolts with external hex. Includes sizes 5, 5.5, 6, 7, 8, 10 and 13 mm, each with a shaft length of 90 mm. The hollow shafts allow work even with nuts on protruding threaded rods. The multi-component ergonom

Cat. number: 2120699

weight: 0,25 kg

M. unit: ks

Logistické balenie: 1 ks

70,53 €

/ ks

excl. VAT

Add to list

4294040

Anchor Hilti HSA-R M10x83 20/10/- #2004202

A through-bolt expansion anchor made of A4 stainless steel with M10 thread and a total length of 83 mm, designed for mechanical fastening into non-cracked concrete. It allows installation through the fixed component as well as stand-off installation. During design and installation, the installation

Cat. number: 4294040

weight: 0,15 kg

M. unit: ks

Logistické balenie: 1 ks

3,71 €

/ ks

excl. VAT

Add to list

2212312

Handle RK.U-FORM.WC.N, stainless steel, for WC

Stainless steel rose door handle fitting in WC version is designed for toilet or bathroom doors. The handles on round roses have a return spring and a matt stainless steel surface. Included are bottom WC roses, fixing hardware, drilling templates, a square spindle 6 x 6 mm and a reducer 6/8 mm.

Cat. number: 2212312

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

25,18 €

/ ks

excl. VAT

Add to list

2251499

Wera Bit-Check Impaktor 1 Bit Set, 6 piece

The six-piece bit set is designed primarily for use with impact drivers. It includes PH 2, PH 3, PZ 2, PZ 3, TX 25 and TX 30 bits, all 50 mm in length. The torsion zone absorbs the load acting on the tip, and a coating with fine diamond particles reduces slipping of the bit from the screw head. The

Cat. number: 2251499

weight: 0,5 kg

M. unit: ks

Logistické balenie: 1 ks

29,51 €

/ ks

excl. VAT

Add to list

3135086

Hearing Protector 3M Peltor H505B-596-SV 24 dB

Earmuff hearing protector with neckband and low-profile cups, designed for use during welding. Has a rated attenuation of SNR 24 dB. Soft wide sealing cushions reduce pressure around the ears and spacious cups help limit the build-up of heat and moisture. Actual attenuation depends on correct fittin

Cat. number: 3135086

weight: 0,38 kg

M. unit: ks

Logistické balenie: 1 ks

45,00 €

/ ks

excl. VAT

Add to list

2433803

Pasta Diamant, marking paste, pack. 225g

Blue marking paste is used for checking the fit and quality of machined surfaces. The coloured trace helps to make contact points and irregularities visible when parts are placed against each other. The package contains 225 g of paste.

Cat. number: 2433803

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

22,32 €

/ ks

excl. VAT

Add to list

Cenové trháky