Výpredaj produktov | STRENDPRO.sk

226647

Blade BOSCH 2.608.631.507, T118A, pack 3pcs

The package contains three T118A type jigsaw blades with T-shank mounting. The HSS high-speed steel blades are designed for cutting thin metal sheets with a thickness of 1 to 3 mm. They have milled, wavy teeth and an overall length of 92 mm. They are suitable for standard cutting cuts in thin sheet

Cat. number: 226647

weight: 0 kg

M. unit: bal

Logistické balenie: 1 bal

5,31 €

/ bal

excl. VAT

Add to list

220371

Gas distributor AB 030.0190 • L=2 8mm, ceramic

The ceramic gas distributor is used to distribute shielding gas in the nozzle of a MIG/MAG welding torch. It has a length of 28 mm and side openings for gas passage. It is used as a replacement part during torch maintenance with the corresponding distributor design.

Cat. number: 220371

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

2,32 €

/ ks

excl. VAT

Add to list

231971

Wrench Expert E113359T 13/16" • 250 mm, combination, DIN 3113

Combination wrench E113359T with inch size 13/16" and length 250 mm is designed for manual tightening and loosening of corresponding nuts and bolt heads. The open jaw allows access from the side, while the ring end is placed from above. The design corresponds to DIN 3113.

Cat. number: 231971

weight: 0,26 kg

M. unit: ks

Logistické balenie: 1 ks

5,95 €

/ ks

excl. VAT

Add to list

231977

Wrench Expert E113235T, 15/16", 280 mm, combination, DIN 3113

Combination wrench E113235T with imperial size 15/16" has a length of 280 mm. It is intended for manual tightening and loosening of nuts and bolt heads of the corresponding size. The open jaw can be fitted from the side, the ring end from above onto the joint. The design complies with DIN 3113.

Cat. number: 231977

weight: 0,39 kg

M. unit: ks

Logistické balenie: 1 ks

8,61 €

/ ks

excl. VAT

Add to list

4152513

Screw 1103.50, M16x065, DIN-933

A hexagon head screw according to DIN 933 designed for bolted connections. It has a metric thread M16 along the full length of the shank and a length of 65 mm.

Cat. number: 4152513

weight: 0,1 kg

M. unit: mks

Logistické balenie: 1 mks

Minimálne vyskladňovacie množstvo: 0.001 mks

380,16 €

/ mks

excl. VAT

Add to list

2530269

Lessmann 542.703 brush, 10x300 mm, cylindrical, brass

A cylindrical brush with brass wire is designed for manual cleaning of inner surfaces of pipes and openings. It has a diameter of 10 mm, a working length of 100 mm and a total length of 300 mm. The wire handle is finished with an eye loop.

Cat. number: 2530269

weight: 0,1 kg

M. unit: ks

Logistické balenie: 1 ks

7,41 €

/ ks

excl. VAT

Add to list

2311022

Kennedy® 601-1700K Key, 07.0 mm, Hex, short, DIN 911

A short hex key of size 07.0 mm is designed for manual tightening and loosening of screws with an internal hexagon. The bent L-shaped body has two arms with straight hexagonal ends. The design complies with the DIN 911 standard.

Cat. number: 2311022

weight: 0,1 kg

M. unit: ks

Logistické balenie: 1 ks

0,73 €

/ ks

excl. VAT

Add to list

2140083

Electrode Interweld IW E 316, 5.0/450 mm, pack 6.5 kg

Coated welding electrode with a diameter of 5.0 mm and a length of 450 mm has a rutile-basic coating and is designed for welding stainless austenitic steels. It is suitable for welding tanks, heat exchangers and piping systems in the chemical and petrochemical industry. The weld metal has a very low

Cat. number: 2140083

weight: 0 kg

M. unit: kg

Logistické balenie: 1 kg

Minimálne vyskladňovacie množstvo: 6.5 kg

36,00 €

/ kg

excl. VAT

Add to list

429384

Anchor HILTI HSA M10x113 50/40/10 #2004150

A through-bolt expansion anchor made of galvanized carbon steel with M10 thread and a total length of 113 mm, designed for mechanical fastening into crack-free concrete. It allows installation through the fixed component as well as stand-off installation. During design and installation, it is necess

Cat. number: 429384

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

0,97 €

/ ks

excl. VAT

Add to list

4201553

Cap Hoffmann 834070 2, M10x1 for thick punch presses

The draw stud with washer serves to connect a round sheet metal punch with a hydraulic drive. On the punch side it has an M10×1 thread, while the connection to the drive is formed by a 3/4-16 UNF thread. The total length of the stud is 88 mm. Type 2 version is intended for round punches with a diame

Cat. number: 4201553

weight: 0,1 kg

M. unit: ks

Logistické balenie: 1 ks

57,38 €

/ ks

excl. VAT

Add to list

114606

Dremel 2.615.S72.4JA Set, 150-piece

A 150-piece accessory set for multifunction rotary tools, designed for various tasks with wood, plastics, soft metals, ceramics, copper and glass. Also includes quick-clamp accessories for easy tool changes. A storage case helps keep all individual parts neatly organised.

Cat. number: 114606

weight: 0 kg

M. unit: sad

Logistické balenie: 1 sad

50,10 €

/ sad

excl. VAT

Add to list

4152990

Screw 1103.99A2 M16x035, DIN-933 A2

Hex head bolt according to DIN 933, designed for bolted connections. It has a metric thread M16 along the full length of the shank and a length of 35 mm. Made of stainless steel A2.

Cat. number: 4152990

weight: 0,1 kg

M. unit: mks

Logistické balenie: 1 mks

Minimálne vyskladňovacie množstvo: 0.001 mks

560,84 €

/ mks

excl. VAT

Add to list

Cenové trháky