Výpredaj produktov | STRENDPRO.sk

2250212

Screwdriver Wiha 334 DSR 4x150, MagicRing

T-handle hex screwdriver designed for internal hex screws of size 4 mm. The working part has a length of 150 mm and the handle is complemented by a side hex output. A flexible steel ring holds the screw in place, making it easier to insert or remove. The blade is made of chrome-vanadium steel with a

Cat. number: 2250212

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

11,55 €

/ ks

excl. VAT

Add to list

227537

File PFERD COR 835 200 H0 • 200/0, half-round

A half-round precision file with a working length of 200 mm, designed for manual finishing of surfaces, edges, and curved areas. It has a coarse Swiss cut 0 and a cross-section with a width of 21 mm and a height of 6 mm. A surface hardness of 1,200 HV allows use even on harder-to-file materials, suc

Cat. number: 227537

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

61,35 €

/ ks

excl. VAT

Add to list

251283

Foot ALVE 9725.10, yellow-black

Replacement foot 9725.10 serves as the end cap for a ladder stile with a 97x25 mm profile. The yellow sliding part is complemented by a black contact surface with prominent ribbing. When replacing, it is necessary to verify the stile profile and the exact type of the original part; a similar colour

Cat. number: 251283

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

1,32 €

/ ks

excl. VAT

Add to list

2310765

Gedore Torcofix-K 4550-10 Torque Wrench, 20-100 Nm

GEDORE TORCOFIX K 4550-10 torque wrench, order code 7601530. Setting range 20-100 Nm, square drive 1/2". Dual scale Nm and lbf·ft; release signals that the set torque has been reached.

Cat. number: 2310765

weight: 0,2 kg

M. unit: ks

Logistické balenie: 1 ks

248,90 €

/ ks

excl. VAT

Add to list

2310351

UNIOR 264 1/2" Torque Wrench, 35-350 Nm

A torque wrench with a 1/2" square drive is designed for controlled tightening of right-hand screws and nuts in the range of 35 to 350 Nm. Reaching the set torque is signalled by a click; after this signal, tightening is not continued. The wrench has a length of 640 mm and a scale in Nm and kgm. It

Cat. number: 2310351

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

143,84 €

/ ks

excl. VAT

Add to list

229700

Pliers Klauke K25

Crimping pliers for cable lugs according to DIN 46234 and pin terminals according to DIN 46230 with cross-sections from 0.5 to 16 mm2. Nickel and stainless steel tubular cable lugs and connectors can be crimped up to a cross-section of 6 mm2. The pliers have a ratchet mechanism and size markings dir

Cat. number: 229700

weight: 0,5 kg

M. unit: ks

Logistické balenie: 1 ks

256,50 €

/ ks

excl. VAT

Add to list

4152653

Bolt 1103.50 M24x100, DIN-933, 8.8 Fe

Hex head screw according to DIN 933, designed for bolted connections. It has a metric thread M24 along the full length of the shank and a length of 100 mm. The strength class of the screw is 8.8.

Cat. number: 4152653

weight: 1 kg

M. unit: mks

Logistické balenie: 1 mks

Minimálne vyskladňovacie množstvo: 0.001 mks

1 255,77 €

/ mks

excl. VAT

Add to list

232094

Socket Expert E034106, 65 mm, drive 1"

A 65 mm hex socket is designed for manual tightening and loosening of screws and nuts. It connects to hand tools via a 1" square drive. It is made of chrome-vanadium steel and has a matte chrome surface finish.

Cat. number: 232094

weight: 1,65 kg

M. unit: ks

Logistické balenie: 1 ks

76,73 €

/ ks

excl. VAT

Add to list

4152664

Screw 1369.55 M16 DIN-580, lifting eye

DIN 580 lifting eye bolt with M16 thread creates a fastening point with an eye when screwed into the corresponding threaded hole. During installation, the bearing surface of the bolt must lie completely flat against the base. When in use, the instructions and the permitted load specified for the par

Cat. number: 4152664

weight: 1 kg

M. unit: mks

Logistické balenie: 1 mks

Minimálne vyskladňovacie množstvo: 0.001 mks

1 492,72 €

/ mks

excl. VAT

Add to list

417495

Washer 1726.15 M14 15, ZN, DIN-9021

Large-area washer according to DIN 9021 for screw connections of size M14. It has a flat design with a wide bearing surface for distributing pressure under the screw head or nut, and a galvanised surface.

Cat. number: 417495

weight: 1 kg

M. unit: mks

Logistické balenie: 1 mks

Minimálne vyskladňovacie množstvo: 0.001 mks

79,09 €

/ mks

excl. VAT

Add to list

2310358

Expert® E111106 Wrench Set, 12-piece, combination, ratcheting

The set contains 12 combination ratchet spanners in sizes 8 to 19 mm for tightening and loosening screws and nuts. The ratchet direction is switched by a lever, and its 5° step allows working even in tight spaces with limited handle movement. The spanners are forged from chrome-vanadium steel and ha

Cat. number: 2310358

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

162,62 €

/ ks

excl. VAT

Add to list

251288

Foot ALVE F-9725 plastic, yellow

The plastic foot F-9725 is a replacement end cap for a ladder profile 97x25 mm. The yellow version has a ribbed slide-in section and a profiled bottom surface. Before replacement, compare the profile dimensions and the marking of the original foot to ensure the part matches the specific ladder.

Cat. number: 251288

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

0,19 €

/ ks

excl. VAT

Add to list

Cenové trháky