The Strend Pro Premium rope is made of polypropylene and is suitable for everyday, general use on construction sites, in gardens, or in agriculture. As they do not absorb water, they can also be used in maritime transport - on every boat and yacht. The rope is strong and durable, resists wear and tear and weather conditions, and is easy to handle. It can be used as a tow rope, pulling rope, and auxiliary rope. Its length is 20 m, diameter is 10 mm, and load capacity is 1755 kg.

The diameter of our ropes is measured according to the European standard EN 2307, which specifies the exact measurement procedure. However, it is important to know that the resulting rope diameter may have a certain tolerance. This deviation depends on the rope's construction (e.g., braid type, number of strands) and the material from which the rope is made. Ropes made from natural fibers such as jute or sisal deserve special attention. For these ropes, the diameter may vary between individual production batches because natural yarns have natural differences in thickness, elasticity, and absorbency. These deviations are not defects but a common characteristic of natural materials.

Approximate Rope Diameter Tolerance

Note: For natural ropes, the tolerance may be higher due to the influence of humidity, storage, and natural fiber variability.

When choosing a rope, we recommend considering this tolerance, especially if the rope diameter is crucial for its use (e.g., in combination with fittings, pulleys, or other technical elements).

± 8%

3, 4, 8, 16, 24, 32, 40, 44, 48 strands

PP, PPV, PES, PA

Synthetic twisted and braided ropes

± 12%

3–4 strands

Jute, sisal

Natural rope

Diameter Tolerance

Construction

Material

Rope Type