Strendpro.sk | Predaj ručného náradia, nástrojov a potrieb pre dom, záhradu a dielňu.

2310557

Wrench UNIOR 184/7 041 mm, ring, impact, DIN 7444

Impact ring spanner with a working size of 41 mm, designed for loosening and tightening nuts and bolts with a corresponding head size. It has a closed ring and an extended handle end for impact transfer. Made from chrome-vanadium steel in accordance with DIN 7444.

Cat. number: 2310557

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

47,52 €

/ ks

excl. VAT

Add to list

2310543

Kennedy® 582-0770K Wrench, 24x27 mm, Double-Ended, DIN 3110

Double-ended open-end wrench 24x27 mm is designed for tightening and loosening nuts and bolts with a hexagonal head. The open jaws allow the tool to be fitted onto the fastener from the side. The wrench is made of chrome-vanadium steel and complies with DIN 3110 standard.

Cat. number: 2310543

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

8,87 €

/ ks

excl. VAT

Add to list

2310820

Kennedy® 581-1140K Tube Wrench, 14x15 mm

Double-ended tube wrench 14x15 mm is designed for manual tightening and loosening of nuts and bolts with the corresponding hexagonal head. The zinc-plated tube body has a transverse hole for operation with a tommy bar. The length of the wrench is 125 mm.

Cat. number: 2310820

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

4,18 €

/ ks

excl. VAT

Add to list

2310183

UNIOR 220/4LPH Hex Key Set, 1.5-12 mm, 10-piece

A set of ten hex keys covers sizes from 1.5 to 12 mm and is designed for tightening and loosening screws with an internal hex drive. The keys have an extended arm for access to deeper-set screws and a short bent arm for turning them. A shared plastic holder keeps the individual keys organised and to

Cat. number: 2310183

weight: 0 kg

M. unit: sad

Logistické balenie: 1 sad

23,93 €

/ sad

excl. VAT

Add to list

2250622

Wiha 351 SZ13 Set, ProStar®, 1/20"-3/8", 13 piece, HEX

The set contains 13 hex keys in inch sizes from 1/20" to 3/8". It is designed for tightening and loosening screws with an internal hex in inch dimensions. The keys are made of chrome-vanadium steel and have a nickel-plated surface. The chamfered ends make it easier to insert into the screw, and the

Cat. number: 2250622

weight: 0,29 kg

M. unit: ks

Logistické balenie: 1 ks

19,11 €

/ ks

excl. VAT

Add to list

2310798

STANLEY® 4-89-944 Ratchet Wrench, 19 mm

A ratchet ring spanner of size 19 mm is used for tightening and loosening screws and nuts. It combines an open jaw for side engagement with a ratchet ring that does not need to be removed from the joint during repeated strokes. The ratchet has a 5° step, allowing work even in tight spaces with limit

Cat. number: 2310798

weight: 0,5 kg

M. unit: ks

Logistické balenie: 1 ks

14,99 €

/ ks

excl. VAT

Add to list

231864

Wrench UNIOR 180/1 11x12, ring, offset 75 deg. Cr-V

Double ring spanner with sizes 11 and 12 mm, designed for tightening and loosening nuts and bolts with the corresponding head size. It has two closed rings and ends offset at an angle of 75°. Made from chrome-vanadium steel.

Cat. number: 231864

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

7,09 €

/ ks

excl. VAT

Add to list

2128015

LOCH CZ leather bag 207 PROFI

leather

Cat. number: 2128015

weight: 0,5 kg

M. unit: ks

Logistické balenie: 1 ks

119,35 €

/ ks

excl. VAT

Add to list

2120986

Bag Loch 202-U Barex, 27x43x18cm, tool

Cat. number: 2120986

weight: 0,5 kg

M. unit: ks

Logistické balenie: 1 ks

109,25 €

/ ks

excl. VAT

Add to list

231971

Wrench Expert E113359T 13/16" • 250 mm, combination, DIN 3113

Combination wrench E113359T with inch size 13/16" and length 250 mm is designed for manual tightening and loosening of corresponding nuts and bolt heads. The open jaw allows access from the side, while the ring end is placed from above. The design corresponds to DIN 3113.

Cat. number: 231971

weight: 0,26 kg

M. unit: ks

Logistické balenie: 1 ks

5,95 €

/ ks

excl. VAT

Add to list

231977

Wrench Expert E113235T, 15/16", 280 mm, combination, DIN 3113

Combination wrench E113235T with imperial size 15/16" has a length of 280 mm. It is intended for manual tightening and loosening of nuts and bolt heads of the corresponding size. The open jaw can be fitted from the side, the ring end from above onto the joint. The design complies with DIN 3113.

Cat. number: 231977

weight: 0,39 kg

M. unit: ks

Logistické balenie: 1 ks

8,61 €

/ ks

excl. VAT

Add to list

2311022

Kennedy® 601-1700K Key, 07.0 mm, Hex, short, DIN 911

A short hex key of size 07.0 mm is designed for manual tightening and loosening of screws with an internal hexagon. The bent L-shaped body has two arms with straight hexagonal ends. The design complies with the DIN 911 standard.

Cat. number: 2311022

weight: 0,1 kg

M. unit: ks

Logistické balenie: 1 ks

0,73 €

/ ks

excl. VAT

Add to list

Catalogue of products