Spanners and set of spanners

231196

Wrench Expert E113225, 30 mm, combination, DIN3113

The E113225 combination wrench with a size of 30 mm is used for manual loosening and tightening of screw connections. One end has an open jaw for side engagement, the other has a closed ring. During assembly or maintenance you can choose the end according to access to the joint. The design correspon

Cat. number: 231196

weight: 0,65 kg

M. unit: ks

Logistické balenie: 1 ks

12,46 €

/ ks

excl. VAT

Add to list

231454

TONA 3110 09.0x11 Open End Wrench

An open-end wrench marked with size 09.0x11 has working jaws at both ends. It is used for tightening and loosening nuts and bolted connections and is fitted onto them from the side.

Cat. number: 231454

weight: 0,05 kg

M. unit: ks

Logistické balenie: 1 ks

2,56 €

/ ks

excl. VAT

Add to list

231397

TONA 838.6 22x24 ring spanner, offset 75°

Double-ended ring spanner sized 22x24, used for tightening and loosening nuts and bolted joints. The rings are offset at an angle of 75°, which raises the handle above the plane of the joint.

Cat. number: 231397

weight: 0,4 kg

M. unit: ks

Logistické balenie: 1 ks

10,85 €

/ ks

excl. VAT

Add to list

2310217

Bahco 133SGM-36 Wrench • 36 mm, striking

A single-sided open-end striking wrench with a size of 36 mm is designed for demanding tightening and loosening of screw connections. It is made of forged steel and has a short profiled handle with a reinforced striking end. The overall length of the wrench is 215 mm.

Cat. number: 2310217

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

31,53 €

/ ks

excl. VAT

Add to list

239250

Tommy bar TONA 659 08 • 160 mm

A tommy bar with a length of 160 mm is designed for manual operation of tube wrenches. By inserting the straight bar into the cross hole of the wrench, a lever is created for rotating it. The tommy bar is used with a wrench whose hole matches its cross-section.

Cat. number: 239250

weight: 0,06 kg

M. unit: ks

Logistické balenie: 1 ks

0,66 €

/ ks

excl. VAT

Add to list

2250212

Screwdriver Wiha 334 DSR 4x150, MagicRing

T-handle hex screwdriver designed for internal hex screws of size 4 mm. The working part has a length of 150 mm and the handle is complemented by a side hex output. A flexible steel ring holds the screw in place, making it easier to insert or remove. The blade is made of chrome-vanadium steel with a

Cat. number: 2250212

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

11,55 €

/ ks

excl. VAT

Add to list

2310765

Gedore Torcofix-K 4550-10 Torque Wrench, 20-100 Nm

GEDORE TORCOFIX K 4550-10 torque wrench, order code 7601530. Setting range 20-100 Nm, square drive 1/2". Dual scale Nm and lbf·ft; release signals that the set torque has been reached.

Cat. number: 2310765

weight: 0,2 kg

M. unit: ks

Logistické balenie: 1 ks

248,90 €

/ ks

excl. VAT

Add to list

2310351

UNIOR 264 1/2" Torque Wrench, 35-350 Nm

A torque wrench with a 1/2" square drive is designed for controlled tightening of right-hand screws and nuts in the range of 35 to 350 Nm. Reaching the set torque is signalled by a click; after this signal, tightening is not continued. The wrench has a length of 640 mm and a scale in Nm and kgm. It

Cat. number: 2310351

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

143,84 €

/ ks

excl. VAT

Add to list

2310358

Expert® E111106 Wrench Set, 12-piece, combination, ratcheting

The set contains 12 combination ratchet spanners in sizes 8 to 19 mm for tightening and loosening screws and nuts. The ratchet direction is switched by a lever, and its 5° step allows working even in tight spaces with limited handle movement. The spanners are forged from chrome-vanadium steel and ha

Cat. number: 2310358

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

162,62 €

/ ks

excl. VAT

Add to list

232500

UNIOR 178/2 27 mm ring spanner, slogging

A single-ended ring spanner with a working size of 27 mm, used for tightening and loosening nuts and bolts with a corresponding head size. The closed ring is offset relative to the handle. The spanner is made of chrome-vanadium steel.

Cat. number: 232500

weight: 0 kg

M. unit: ks

Logistické balenie: 1 ks

35,25 €

/ ks

excl. VAT

Add to list

2310476

Expert® E110300 Wrench Set, 8-piece, combination, vinyl

An eight-piece combination spanner set designed for tightening and loosening metric screws and nuts. Contains sizes 8, 10, 11, 13, 17, 19, 22 and 24 mm. Each spanner combines an open jaw for side engagement with a ring end for gripping the nut. A vinyl case is included for storing and carrying the c

Cat. number: 2310476

weight: 1 kg

M. unit: ks

Logistické balenie: 1 ks

37,00 €

/ ks

excl. VAT

Add to list

2310529

Format 5772-0085 Tubular Wrench, 24x27 mm, DIN896B

Double-ended tubular box spanner with sizes 24 and 27 mm, used for tightening and loosening hexagonal nuts and bolts. Made from seamless precision steel tube with a chrome-plated surface. Has a length of 185 mm and holes for inserting a tommy bar. Execution complies with DIN 896, form B, and ISO 223

Cat. number: 2310529

weight: 0,2 kg

M. unit: ks

Logistické balenie: 1 ks

6,31 €

/ ks

excl. VAT

Add to list