Laser Strend Pro Industrial 4 x 3D - green (in case, with accessories + remote control)

A laser levelling device designed for detecting and checking horizontal and vertical lines. It allows switching and combining horizontal and vertical lines as needed when working indoors and outdoors.

Main advantages

• Self-levelling: automatic compensation of unevenness within the self-levelling range.

• Pulse mode: suitable for bright environments and longer distances; compatible with a detector.

• Durability: IP54 protection rating.

• Practical power supply: Li-Ion battery + charging via USB-C (Type-C).

• Tripod mount: 1/4" thread.

Remote control

• The measuring device cannot be turned on by the remote control (remote control only works after the device is switched on).

• The remote control and the device are paired from the factory; when re-pairing, hold the button on the device and the remote for at least 3 s (confirmed by a beep).

• Remotely, it is possible to switch the lighting modes of horizontal and vertical beams; pulse mode is turned on/off by holding the button (at least 2 s) in automatic mode.

Technical parameters

Working range: standard 30 m

Working range with detector: > 50 m

Levelling accuracy: +/-3 mm / 10 m

Self-levelling range: 4 degrees +/- 1 degree

Levelling time: 3 s

Operating temperature: -10 °C to +50 °C

Storage temperature: -20 °C to +70 °C

Laser class: Class II

Laser type: 505 - 520 nm, < 1 mW

Tripod mount: 1/4"

Power supply: 3.7 V / 5,200 mAh lithium battery

Charging port: Type-C

Charging adapter: 5 V = 1 A

Charging time: approximately 5 hours

Operating time: approximately 4 hours

Protection type: IP54

Package contents (in case)

• Remote control

• Target plate

• Wall bracket

• 360° rotating base

• Vertical sliding bracket (height-adjustable)

• USB-C charging cable

• Li-Ion battery

• Mains adapter

Notice:

Laser calibration is not covered by the warranty. Calibration is part of routine maintenance and may be affected by transport, handling, or use in unsuitable conditions. If necessary, service calibration can be arranged as a paid service outside of warranty repairs.