Submersible pump Strend Pro 2in1 with a power input of 750 W is designed for efficient pumping of muddy, dirty water containing solid particles up to a diameter of 25 mm. The pump is supplied with a retractable filter that offers two usage options:
• With the filter extended – allows pumping of muddy water containing solid particles up to Ø 25 mm.
• Without the filter extended – allows pumping of clean water with a minimal amount of impurities.
It is an ideal helper for draining ponds, basements, construction pits or other spaces
flooded with dirty water. With a maximum flow rate of 13,500 litres per hour, a delivery head of up to 7.5 metres and a submersion depth of up to 7 metres, it handles demanding tasks quickly and reliably.
A 10-metre power cable provides sufficient reach even in hard-to-access locations.
Thanks to the multi-size hose connector, the pump can be easily connected to commonly available hoses of various sizes.
The device operates fully submerged below the water surface, with the motor driving a turbine that ensures
efficient water intake and discharge. A float switch automatically turns the pump on or off depending on the water level, preventing it from running dry.

SUITABLE USE:
• Pumping muddy or dirty water containing solid particles with max. Ø 25 mm (e.g.
sand, mud, leaves, small gravel)
• Flood situations – pumping water from basements, garages or other flooded spaces
• Construction excavations and pits where water with impurities accumulates
• Pumping water from ponds, streams or tanks
• Garden irrigation (if the water source is e.g. a stream or a rainwater tank)
UNSUITABLE USE:
• Pumping drinking water (the pump is not intended for sanitary purposes)
• Pumping liquids whose temperature exceeds 35°C
• Pumping aggressive or corrosive liquids (acids, chemicals, oils, petrol, etc.)
• Operation without water (dry running) – risk of pump damage
• Use in explosive or flammable environments
• Permanent installations as part of pressurised or water supply systems