Submersible pump Strend Pro with a power input of 550 W is designed for effective pumping of clean or slightly dirty water containing small particles up to Ø 5 mm. It can pump out residual water down to a level of approximately 2 mm, allowing for an almost complete drying of the surface.
Thanks to its compact design, it is an ideal solution for use in households, gardens or smaller
technical applications. With a maximum flow rate of 6,500 litres per hour, a delivery head of up to 7.5 metres and a submersion depth of up to 7 metres, it handles demanding tasks quickly and reliably.
A 10-metre power cable provides sufficient reach even in hard-to-access locations.
Thanks to the multi-hose connector, the pump can be easily connected to commonly available hoses
of various sizes. Hose connector types: 1”; G1-1/4”; 1-1/2”; G1-1/2”.
The device operates fully submerged below the water surface, with the motor driving a turbine that ensures
effective water intake and discharge.
A float switch automatically turns the pump on or off depending on the water level, thereby preventing
it from running dry.

SUITABLE USE:
• Pumping clean or slightly dirty water containing solid particles with max. Ø 5 mm
• Draining pools, cisterns, tanks
• Flood situations – pumping water from basements, garages or other flooded spaces (as long as the water
does not contain larger impurities)
• Pumping water from wells and shafts
• Garden irrigation (when the water source is e.g. a stream or a rainwater tank)
UNSUITABLE USE:
• Pumping drinking water (the pump is not intended for sanitary purposes)
• Pumping muddy, silty or heavily contaminated water with particles larger than Ø 5 mm
• Pumping liquids whose temperature exceeds 35°C
• Pumping aggressive or corrosive liquids (acids, chemicals, oils, petrol, etc.)
• Operation without water (dry running) – risk of pump damage
• Use in explosive or flammable environments
• Permanent installations as part of pressurised or plumbing systems.