Strend Pro BGA4006-15-01 is a compact and powerful gas heater with a heat output of 15 kW, designed for rapid heating of suitably ventilated workspaces and utility areas. It is particularly suitable for workshops, warehouses, garages, agricultural premises, or construction sites.

The heater runs on butane (G30) and is classified under gas category I3B/P. At maximum output it achieves a gas consumption of approximately 1.09 kg/h. The fan ensures an airflow of up to 580 m³/h, allowing warm air to be distributed quickly throughout the space.

The model is equipped with piezoelectric ignition for easy start-up and an overheat protection thermostat that activates at approximately 95 °C. Protection rating IPX4 provides protection against splashing water.

Included in the set is a regulator with a pressure of 700 mbar and a flow rate of 3 kg/h. The construction combines PP (polypropylene) and cold-rolled low-carbon steel, achieving a favourable combination of durability and low weight.

Technical parameters

• Model: BGA4006-15-01
• Gas type: butane (G30)
• Gas category: I3B/P
• Heat output: 15 kW
• Gas consumption: 1.09 kg/h
• Airflow: 580 m³/h
• Gas pressure: 700 mbar
• Power supply: 230 V / 50 Hz
• Ignition: piezoelectric
• Overheat thermostat: 95 °C
• Protection rating: IPX4
• Dimensions: 190 × 380 × 305 mm
• Power cable length: 1.6 m
• Total weight: 4.8 kg
• Net weight: 3.7 kg
• Frame material: PP (polypropylene) + cold-rolled low-carbon steel
• Regulator: 700 mbar, 3 kg/h

Note: a lower concentration of butane in the fuel cylinder may reduce the specified heating efficiency. The stated parameters correspond to fuel with approximately 90% butane content.