
Optimal welding solutions
Robust and powerful
Origo ™ Mig 3001i is the ideal partner for workshop production, assembly or all types of welding for repair and maintenance. Welding machines are compact and durable devices with a frame made of galvanized steel, ensuring a longer service life in extreme environments even during harsh handling. These machines use IGBT inverter technology, which gives them reliability and excellent welding characteristics. Communication and control via the CANbus system bus means less cable connections and consequently increased operational reliability. ESAB LogicPump. The patented ESAB LogicPump, ELP feature automatically turns on the cooling pump when a water-cooled burner is connected to the Origo Feed 3004 / 4804w, Aristo ™ Feed 3004 / 4804w, or YardFeed 2000w. This eliminates the risk of the welding torch overheating. When the air-cooled burner is connected, the pump is switched off to reduce the noise level, reduce energy consumption and extend the pump life.
flexibility
Welding machines are optimized to work with Origo ™ Feed 3004/4804, Aristo ™ Feed 3004/4804 or YardFeed 2000 wire feeders. Up to 50m interconnect cables provide a working range of 54.5m to suit all needs. The TrueArcVoltage System ™, in combination with the ESAB PSF ™ torch, ensures that the arc will be welded to the correct arc voltage regardless of any voltage drop across the welding cables. 3 m burner or 35 m working range. Origo ™ Mig 3001i enables the following welding processes: MIG / MAG, pulsed MIG, ROZ and carbon electrode gouging. The selection of processes depends on the selection of the various control panels. Origo ™ A24 - enhanced Feature The Origo ™ Mig 4001i A24 can work with the standard Feed 3004/4804 or the ArcF powered MobileFeed. Dual MMC software allows two MMC panels to operate in parallel on the system bus. The A24 supports MobileFeed and the feeder panel (MA23 / 24 or U6) supports standard feeders.
panels
Also available with A24 panel (not included) . Origo Mig 3001, A24 can be used for MMA and TIG welding with LiveTig start. The source allows welding MIG / MAG with Feed 3004/4804 or MobileFeed. Dual MMC software allows two panels to be controlled simultaneously on CAN bus lines. Origo A24 communicates with MobileFeed and MA23 / 24 or U6 panels communicate with a standard source.
Equipment:
trolley, remote control, connecting cable